I get a lot of questions about cutting polycarbonate sheets. It is really quite simple. Pretty much the same as cutting a sheet of plywood. There are just a few tricks to remember to get a really good, clean installation. Watch this video to learn how to cut polycarbonate sheets. Have more questions about installing polycarbonate? Subscribe to Advance Greenhouse YouTube channel and our polycarbonate glazing tips playlist.
I get asked this question every day. How do I figure how many polycarbonate sheets and profiles do I need to build my greenhouse? I think the problem is that everyone tries to look at it as a complete project. The easiest way to do this is to break the greenhouse into sections. Figure one side of the roof, then multiply by 2. Figure one side wall, then multiply by 2. Figure one gable end and multiply by 2. Add these together and you have your complete bill of material. The following video outlines this in more detail for you. Please remember, if you cannot figure your own bill of material, how are you going to be able to figure out where to put the parts when you receive it? It takes just a few minutes to get a better grasp on polycarbonate installation. Just remember, don’t over think the process, and watch all of our videos in our Polycarbonate Glazing Tips playlist.
Many people are confused about how to install polycarbonate sheets on their greenhouses. There are just a few basic rules to follow. This video outlines some of the basic storage and installation tips. We will discuss a few more of the basic installation tips regarding framing and fastening in future videos. There are all steadfast rules that must be followed for a leak free, worry free installation.